EasyWeed™ Glow Heat Transfer Vinyl

Create Custom Designs that Glow in the Dark!

EasyWeed Glow™ is a white polyurethane heat transfer vinyl that looks great in the daylight and glows in the dark! Glow is available in white and it cuts and weeds like our popular EasyWeed™heat transfer vinyl. You “charge” the material by exposing it to sunlight. The more light you give it, the more it glows in the dark! Great for crafters looking to create kids’ pillow cases with messages they can see when they go to bed and great for simple Halloween costumes!

EasyWeed™ Glow is CPSIA Certified so even little ones can get in on the glow in the dark fun!

Glow as it appears in the light
Glow as it appears in the dark

Certifications

CPSIA Certified

SPECIFICATIONS

PU composition • Pressure sensitive backing • Matte finish • 90 Microns / 3.5 Mils • 45°/60° blade

APPLIES TO

100% Cotton • 100% Uncoated Polyester • Poly/Cotton Blends • Leather

HEAT APPLICATION

Preheat: 2-3 Seconds • Temperature: 305° F / 150° C • Pressure: Medium • Time: 10-15 Seconds • Peel: HOT or COLD

CARE INSTRUCTIONS

Do not dry clean • Machine wash WARM / mild detergent • Dry at normal setting • No chlorine bleach • Wait 24 hours before first wash • Turn garment inside out

RECOMMENDED ACCESSORIES

Siser® Weeder • Multipurpose Paper or Heat Transfer Cover Sheet

Why the material is round to 14.75” and 19.75”?

It is an industry practice to round up the to the nearest whole number size for HTV width labeling.

The actual size of the Easyweed rolls is 14.75” because when the materials are slit down to the specific size it is to achieve the best yield to minimize waste material. If the rolls were exactly 15 or 20 inches, there would be a lot of waste material. This waste can really impact the end cost of the material roll and also create excessive odd sized waste in the long run.

Guardar